CentOS 源使用帮助

说明

CentOS 软件源

收录架构

x86_64, i386

收录版本

6, 7, 8

使用说明

警告

操作前请做好相应备份。

对于 CentOS 8,使用以下命令替换默认的配置

sudo sed -e 's|^mirrorlist=|#mirrorlist=|g' \
         -e 's|^#baseurl=http://mirror.centos.org/$contentdir|baseurl=https://mirrors.ustc.edu.cn/centos|g' \
         -i.bak \
         /etc/yum.repos.d/CentOS-Base.repo \
         /etc/yum.repos.d/CentOS-Extras.repo \
         /etc/yum.repos.d/CentOS-AppStream.repo

对于 CentOS 6、7,使用以下命令替换默认配置

sudo sed -e 's|^mirrorlist=|#mirrorlist=|g' \
         -e 's|^#baseurl=http://mirror.centos.org/centos|baseurl=https://mirrors.ustc.edu.cn/centos|g' \
         -i.bak \
         /etc/yum.repos.d/CentOS-Base.repo

以上命令只替换了默认启用的仓库。替换之后请运行 yum makecache 更新缓存。

以下是替换之后的文件:

  • CentOS 8:

    /etc/yum.repos.d/CentOS-Base.repo 文件:

    # CentOS-Base.repo
    #
    # The mirror system uses the connecting IP address of the client and the
    # update status of each mirror to pick mirrors that are updated to and
    # geographically close to the client.  You should use this for CentOS updates
    # unless you are manually picking other mirrors.
    #
    # If the mirrorlist= does not work for you, as a fall back you can try the
    # remarked out baseurl= line instead.
    #
    #
    
    [BaseOS]
    name=CentOS-$releasever - Base
    #mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=BaseOS&infra=$infra
    baseurl=https://mirrors.ustc.edu.cn/centos/$releasever/BaseOS/$basearch/os/
    gpgcheck=1
    enabled=1
    gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-centosofficial
    

    /etc/yum.repos.d/CentOS-Extras.repo 文件:

    # CentOS-Extras.repo
    #
    # The mirror system uses the connecting IP address of the client and the
    # update status of each mirror to pick mirrors that are updated to and
    # geographically close to the client.  You should use this for CentOS updates
    # unless you are manually picking other mirrors.
    #
    # If the mirrorlist= does not work for you, as a fall back you can try the
    # remarked out baseurl= line instead.
    #
    #
    
    #additional packages that may be useful
    [extras]
    name=CentOS-$releasever - Extras
    #mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=extras&infra=$infra
    baseurl=https://mirrors.ustc.edu.cn/centos/$releasever/extras/$basearch/os/
    gpgcheck=1
    enabled=1
    gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-centosofficial
    

    /etc/yum.repos.d/CentOS-AppStream.repo 文件:

    # CentOS-AppStream.repo
    #
    # The mirror system uses the connecting IP address of the client and the
    # update status of each mirror to pick mirrors that are updated to and
    # geographically close to the client.  You should use this for CentOS updates
    # unless you are manually picking other mirrors.
    #
    # If the mirrorlist= does not work for you, as a fall back you can try the
    # remarked out baseurl= line instead.
    #
    #
    
    [AppStream]
    name=CentOS-$releasever - AppStream
    #mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=AppStream&infra=$infra
    baseurl=https://mirrors.ustc.edu.cn/centos/$releasever/AppStream/$basearch/os/
    gpgcheck=1
    enabled=1
    gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-centosofficial
    
  • CentOS 7:

    /etc/yum.repos.d/CentOS-Base.repo 文件:

    # CentOS-Base.repo
    #
    # The mirror system uses the connecting IP address of the client and the
    # update status of each mirror to pick mirrors that are updated to and
    # geographically close to the client.  You should use this for CentOS updates
    # unless you are manually picking other mirrors.
    #
    # If the mirrorlist= does not work for you, as a fall back you can try the
    # remarked out baseurl= line instead.
    #
    #
    
    [base]
    name=CentOS-$releasever - Base
    #mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=os&infra=$infra
    baseurl=https://mirrors.ustc.edu.cn/centos/$releasever/os/$basearch/
    gpgcheck=1
    gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
    
    #released updates
    [updates]
    name=CentOS-$releasever - Updates
    #mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=updates&infra=$infra
    baseurl=https://mirrors.ustc.edu.cn/centos/$releasever/updates/$basearch/
    gpgcheck=1
    gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
    
    #additional packages that may be useful
    [extras]
    name=CentOS-$releasever - Extras
    #mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=extras&infra=$infra
    baseurl=https://mirrors.ustc.edu.cn/centos/$releasever/extras/$basearch/
    gpgcheck=1
    gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
    
    #additional packages that extend functionality of existing packages
    [centosplus]
    name=CentOS-$releasever - Plus
    #mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=centosplus&infra=$infra
    baseurl=https://mirrors.ustc.edu.cn/centos/$releasever/centosplus/$basearch/
    gpgcheck=1
    enabled=0
    gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
    
  • CentOS 6:

    /etc/yum.repos.d/CentOS-Base.repo 文件:

    # CentOS-Base.repo
    #
    # The mirror system uses the connecting IP address of the client and the
    # update status of each mirror to pick mirrors that are updated to and
    # geographically close to the client.  You should use this for CentOS updates
    # unless you are manually picking other mirrors.
    #
    # If the mirrorlist= does not work for you, as a fall back you can try the
    # remarked out baseurl= line instead.
    #
    #
    
    [base]
    name=CentOS-$releasever - Base
    #mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=os&infra=$infra
    baseurl=https://mirrors.ustc.edu.cn/centos/$releasever/os/$basearch/
    gpgcheck=1
    gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-6
    
    #released updates
    [updates]
    name=CentOS-$releasever - Updates
    #mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=updates&infra=$infra
    baseurl=https://mirrors.ustc.edu.cn/centos/$releasever/updates/$basearch/
    gpgcheck=1
    gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-6
    
    #additional packages that may be useful
    [extras]
    name=CentOS-$releasever - Extras
    #mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=extras&infra=$infra
    baseurl=https://mirrors.ustc.edu.cn/centos/$releasever/extras/$basearch/
    gpgcheck=1
    gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-6
    
    #additional packages that extend functionality of existing packages
    [centosplus]
    name=CentOS-$releasever - Plus
    #mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=centosplus&infra=$infra
    baseurl=https://mirrors.ustc.edu.cn/centos/$releasever/centosplus/$basearch/
    gpgcheck=1
    enabled=0
    gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-6
    
    #contrib - packages by Centos Users
    [contrib]
    name=CentOS-$releasever - Contrib
    #mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=contrib&infra=$infra
    baseurl=https://mirrors.ustc.edu.cn/centos/$releasever/contrib/$basearch/
    gpgcheck=1
    enabled=0
    gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-6